Qualcomm Technologies, Inc. SMB1390 Charger Specific Bindings

SMB1390 charge pump is paired with QTI family of standalone chargers to
enable a high current, high efficiency Li+ battery charging system.

=======================
Required Node Structure
=======================

SMB1390 Charger must be described in two levels of device nodes.

==================================
First Level Node - SMB1390 Charger
==================================

Charger specific properties:
- compatible
  Usage:      required
  Value type: <string>
  Definition: "qcom,smb1390-charger".

- qcom,pmic-revid
  Usage:      required
  Value type: phandle
  Definition: Should specify the phandle of SMB's revid module. This is used
	      to identify the SMB subtype.

- qcom,channel-num
  Usage:      required
  Value type: <u32>
  Definition: Specifies the ADC channel number for reading die temperature.

================================================
Second Level Nodes - SMB1390 Charger Peripherals
================================================

Peripheral specific properties:
- interrupts
  Usage:      required
  Value type: <prop-encoded-array>
  Definition: Peripheral interrupt specifier.

- interrupt-names
  Usage:      required
  Value type: <stringlist>
  Definition: Interrupt names.  This list must match up 1-to-1 with the
	      interrupts specified in the 'interrupts' property.

=======
Example
=======

smb1390_charger: qcom,charge_pump {
	compatible = "qcom,smb1390-charger";
	qcom,pmic-revid = <&smb1390_revid>;
	qcom,channel-num = <15>
	interrupt-parent = <&smb1390>;
	qcom,smb-vadc = <&pm8998_vadc>;
	status = "disabled";

	qcom,core {
		interrupts = <0x10 0x0 IRQ_TYPE_EDGE_RISING>,
			     <0x10 0x1 IRQ_TYPE_EDGE_RISING>,
			     <0x10 0x2 IRQ_TYPE_EDGE_RISING>,
			     <0x10 0x3 IRQ_TYPE_EDGE_RISING>,
			     <0x10 0x4 IRQ_TYPE_EDGE_RISING>;
		interrupt-names = "switcher-off-window",
				  "switcher-off-fault",
				  "vph-ov-soft",
				  "ilim",
				  "temp-alarm";
	};
};