| 12345678910111213141516171819202122232425262728293031323334353637383940414243 |
- Device tree bindings for Goodix GT9xx series touchscreen controller
- Required properties:
- - compatible : Should be "goodix,gt911"
- or "goodix,gt9110"
- or "goodix,gt912"
- or "goodix,gt927"
- or "goodix,gt9271"
- or "goodix,gt928"
- or "goodix,gt967"
- - reg : I2C address of the chip. Should be 0x5d or 0x14
- - interrupt-parent : Interrupt controller to which the chip is connected
- - interrupts : Interrupt to which the chip is connected
- Optional properties:
- - irq-gpios : GPIO pin used for IRQ. The driver uses the
- interrupt gpio pin as output to reset the device.
- - reset-gpios : GPIO pin used for reset
- - touchscreen-inverted-x : X axis is inverted (boolean)
- - touchscreen-inverted-y : Y axis is inverted (boolean)
- - touchscreen-swapped-x-y : X and Y axis are swapped (boolean)
- (swapping is done after inverting the axis)
- Example:
- i2c@00000000 {
- /* ... */
- gt928@5d {
- compatible = "goodix,gt928";
- reg = <0x5d>;
- interrupt-parent = <&gpio>;
- interrupts = <0 0>;
- irq-gpios = <&gpio1 0 0>;
- reset-gpios = <&gpio1 1 0>;
- };
- /* ... */
- };
|
