android10/kernel/Documentation/devicetree/bindings/powerpc/fsl/mpic-msgr.txt

* FSL MPIC Message Registers

This binding specifies what properties must be available in the device tree
representation of the message register blocks found in some FSL MPIC
implementations.

Required properties:

    - compatible: Specifies the compatibility list for the message register
      block.  The type shall be <string-list> and the value shall be of the form
      "fsl,mpic-v<version>-msgr", where <version> is the version number of
      the MPIC containing the message registers.

    - reg: Specifies the base physical address(s) and size(s) of the
      message register block's addressable register space.  The type shall be
      <prop-encoded-array>.

    - interrupts: Specifies a list of interrupt-specifiers which are available
      for receiving interrupts. Interrupt-specifier consists of two cells: first
      cell is interrupt-number and second cell is level-sense. The type shall be
      <prop-encoded-array>.

Optional properties:

    - mpic-msgr-receive-mask: Specifies what registers in the containing block
      are allowed to receive interrupts. The value is a bit mask where a set
      bit at bit 'n' indicates that message register 'n' can receive interrupts.
      Note that "bit 'n'" is numbered from LSB for PPC hardware. The type shall
      be <u32>. If not present, then all of the message registers in the block
      are available.

Aliases:

    An alias should be created for every message register block.  They are not
    required, though.  However, a particular implementation of this binding
    may require aliases to be present.  Aliases are of the form
    'mpic-msgr-block<n>', where <n> is an integer specifying the block's number.
    Numbers shall start at 0.

Example:

	aliases {
		mpic-msgr-block0 = &mpic_msgr_block0;
		mpic-msgr-block1 = &mpic_msgr_block1;
	};

	mpic_msgr_block0: mpic-msgr-block@41400 {
		compatible = "fsl,mpic-v3.1-msgr";
		reg = <0x41400 0x200>;
		// Message registers 0 and 2 in this block can receive interrupts on
		// sources 0xb0 and 0xb2, respectively.
		interrupts = <0xb0 2 0xb2 2>;
		mpic-msgr-receive-mask = <0x5>;
	};

	mpic_msgr_block1: mpic-msgr-block@42400 {
		compatible = "fsl,mpic-v3.1-msgr";
		reg = <0x42400 0x200>;
		// Message registers 0 and 2 in this block can receive interrupts on
		// sources 0xb4 and 0xb6, respectively.
		interrupts = <0xb4 2 0xb6 2>;
		mpic-msgr-receive-mask = <0x5>;
	};