123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223 |
- /*
- * upd6408x - NEC Electronics 3-Dimensional Y/C separation driver
- *
- * 2003 by T.Adachi ([email protected])
- * 2003 by Takeru KOMORIYA <[email protected]>
- * 2006 by Hans Verkuil <[email protected]>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
- #include <linux/module.h>
- #include <linux/kernel.h>
- #include <linux/i2c.h>
- #include <linux/videodev2.h>
- #include <linux/slab.h>
- #include <media/v4l2-device.h>
- #include <media/i2c/upd64083.h>
- MODULE_DESCRIPTION("uPD64083 driver");
- MODULE_AUTHOR("T. Adachi, Takeru KOMORIYA, Hans Verkuil");
- MODULE_LICENSE("GPL");
- static bool debug;
- module_param(debug, bool, 0644);
- MODULE_PARM_DESC(debug, "Debug level (0-1)");
- enum {
- R00 = 0, R01, R02, R03, R04,
- R05, R06, R07, R08, R09,
- R0A, R0B, R0C, R0D, R0E, R0F,
- R10, R11, R12, R13, R14,
- R15, R16,
- TOT_REGS
- };
- struct upd64083_state {
- struct v4l2_subdev sd;
- u8 mode;
- u8 ext_y_adc;
- u8 regs[TOT_REGS];
- };
- static inline struct upd64083_state *to_state(struct v4l2_subdev *sd)
- {
- return container_of(sd, struct upd64083_state, sd);
- }
- /* Initial values when used in combination with the
- NEC upd64031a ghost reduction chip. */
- static u8 upd64083_init[] = {
- 0x1f, 0x01, 0xa0, 0x2d, 0x29, /* we use EXCSS=0 */
- 0x36, 0xdd, 0x05, 0x56, 0x48,
- 0x00, 0x3a, 0xa0, 0x05, 0x08,
- 0x44, 0x60, 0x08, 0x52, 0xf8,
- 0x53, 0x60, 0x10
- };
- /* ------------------------------------------------------------------------ */
- static void upd64083_write(struct v4l2_subdev *sd, u8 reg, u8 val)
- {
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- u8 buf[2];
- buf[0] = reg;
- buf[1] = val;
- v4l2_dbg(1, debug, sd, "write reg: %02x val: %02x\n", reg, val);
- if (i2c_master_send(client, buf, 2) != 2)
- v4l2_err(sd, "I/O error write 0x%02x/0x%02x\n", reg, val);
- }
- /* ------------------------------------------------------------------------ */
- #ifdef CONFIG_VIDEO_ADV_DEBUG
- static u8 upd64083_read(struct v4l2_subdev *sd, u8 reg)
- {
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- u8 buf[7];
- if (reg >= sizeof(buf))
- return 0xff;
- i2c_master_recv(client, buf, sizeof(buf));
- return buf[reg];
- }
- #endif
- /* ------------------------------------------------------------------------ */
- static int upd64083_s_routing(struct v4l2_subdev *sd,
- u32 input, u32 output, u32 config)
- {
- struct upd64083_state *state = to_state(sd);
- u8 r00, r02;
- if (input > 7 || (input & 6) == 6)
- return -EINVAL;
- state->mode = (input & 3) << 6;
- state->ext_y_adc = (input & UPD64083_EXT_Y_ADC) << 3;
- r00 = (state->regs[R00] & ~(3 << 6)) | state->mode;
- r02 = (state->regs[R02] & ~(1 << 5)) | state->ext_y_adc;
- upd64083_write(sd, R00, r00);
- upd64083_write(sd, R02, r02);
- return 0;
- }
- #ifdef CONFIG_VIDEO_ADV_DEBUG
- static int upd64083_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg)
- {
- reg->val = upd64083_read(sd, reg->reg & 0xff);
- reg->size = 1;
- return 0;
- }
- static int upd64083_s_register(struct v4l2_subdev *sd, const struct v4l2_dbg_register *reg)
- {
- upd64083_write(sd, reg->reg & 0xff, reg->val & 0xff);
- return 0;
- }
- #endif
- static int upd64083_log_status(struct v4l2_subdev *sd)
- {
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- u8 buf[7];
- i2c_master_recv(client, buf, 7);
- v4l2_info(sd, "Status: SA00=%02x SA01=%02x SA02=%02x SA03=%02x "
- "SA04=%02x SA05=%02x SA06=%02x\n",
- buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6]);
- return 0;
- }
- /* ----------------------------------------------------------------------- */
- static const struct v4l2_subdev_core_ops upd64083_core_ops = {
- .log_status = upd64083_log_status,
- #ifdef CONFIG_VIDEO_ADV_DEBUG
- .g_register = upd64083_g_register,
- .s_register = upd64083_s_register,
- #endif
- };
- static const struct v4l2_subdev_video_ops upd64083_video_ops = {
- .s_routing = upd64083_s_routing,
- };
- static const struct v4l2_subdev_ops upd64083_ops = {
- .core = &upd64083_core_ops,
- .video = &upd64083_video_ops,
- };
- /* ------------------------------------------------------------------------ */
- /* i2c implementation */
- static int upd64083_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
- {
- struct upd64083_state *state;
- struct v4l2_subdev *sd;
- int i;
- if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
- return -EIO;
- v4l_info(client, "chip found @ 0x%x (%s)\n",
- client->addr << 1, client->adapter->name);
- state = devm_kzalloc(&client->dev, sizeof(*state), GFP_KERNEL);
- if (state == NULL)
- return -ENOMEM;
- sd = &state->sd;
- v4l2_i2c_subdev_init(sd, client, &upd64083_ops);
- /* Initially assume that a ghost reduction chip is present */
- state->mode = 0; /* YCS mode */
- state->ext_y_adc = (1 << 5);
- memcpy(state->regs, upd64083_init, TOT_REGS);
- for (i = 0; i < TOT_REGS; i++)
- upd64083_write(sd, i, state->regs[i]);
- return 0;
- }
- static int upd64083_remove(struct i2c_client *client)
- {
- struct v4l2_subdev *sd = i2c_get_clientdata(client);
- v4l2_device_unregister_subdev(sd);
- return 0;
- }
- /* ----------------------------------------------------------------------- */
- static const struct i2c_device_id upd64083_id[] = {
- { "upd64083", 0 },
- { }
- };
- MODULE_DEVICE_TABLE(i2c, upd64083_id);
- static struct i2c_driver upd64083_driver = {
- .driver = {
- .name = "upd64083",
- },
- .probe = upd64083_probe,
- .remove = upd64083_remove,
- .id_table = upd64083_id,
- };
- module_i2c_driver(upd64083_driver);
|