123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441 |
- /*
- * SPI Link Layer for ST NCI based Driver
- * Copyright (C) 2014-2015 STMicroelectronics SAS. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see <http://www.gnu.org/licenses/>.
- */
- #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
- #include <linux/module.h>
- #include <linux/spi/spi.h>
- #include <linux/gpio.h>
- #include <linux/gpio/consumer.h>
- #include <linux/of_irq.h>
- #include <linux/of_gpio.h>
- #include <linux/acpi.h>
- #include <linux/interrupt.h>
- #include <linux/delay.h>
- #include <linux/nfc.h>
- #include <net/nfc/nci.h>
- #include <linux/platform_data/st-nci.h>
- #include "st-nci.h"
- #define DRIVER_DESC "NCI NFC driver for ST_NCI"
- /* ndlc header */
- #define ST_NCI_FRAME_HEADROOM 1
- #define ST_NCI_FRAME_TAILROOM 0
- #define ST_NCI_SPI_MIN_SIZE 4 /* PCB(1) + NCI Packet header(3) */
- #define ST_NCI_SPI_MAX_SIZE 250 /* req 4.2.1 */
- #define ST_NCI_SPI_DRIVER_NAME "st_nci_spi"
- #define ST_NCI_GPIO_NAME_RESET "reset"
- struct st_nci_spi_phy {
- struct spi_device *spi_dev;
- struct llt_ndlc *ndlc;
- bool irq_active;
- unsigned int gpio_reset;
- unsigned int irq_polarity;
- struct st_nci_se_status se_status;
- };
- static int st_nci_spi_enable(void *phy_id)
- {
- struct st_nci_spi_phy *phy = phy_id;
- gpio_set_value(phy->gpio_reset, 0);
- usleep_range(10000, 15000);
- gpio_set_value(phy->gpio_reset, 1);
- usleep_range(80000, 85000);
- if (phy->ndlc->powered == 0 && phy->irq_active == 0) {
- enable_irq(phy->spi_dev->irq);
- phy->irq_active = true;
- }
- return 0;
- }
- static void st_nci_spi_disable(void *phy_id)
- {
- struct st_nci_spi_phy *phy = phy_id;
- disable_irq_nosync(phy->spi_dev->irq);
- phy->irq_active = false;
- }
- /*
- * Writing a frame must not return the number of written bytes.
- * It must return either zero for success, or <0 for error.
- * In addition, it must not alter the skb
- */
- static int st_nci_spi_write(void *phy_id, struct sk_buff *skb)
- {
- int r;
- struct st_nci_spi_phy *phy = phy_id;
- struct spi_device *dev = phy->spi_dev;
- struct sk_buff *skb_rx;
- u8 buf[ST_NCI_SPI_MAX_SIZE + NCI_DATA_HDR_SIZE +
- ST_NCI_FRAME_HEADROOM + ST_NCI_FRAME_TAILROOM];
- struct spi_transfer spi_xfer = {
- .tx_buf = skb->data,
- .rx_buf = buf,
- .len = skb->len,
- };
- if (phy->ndlc->hard_fault != 0)
- return phy->ndlc->hard_fault;
- r = spi_sync_transfer(dev, &spi_xfer, 1);
- /*
- * We may have received some valuable data on miso line.
- * Send them back in the ndlc state machine.
- */
- if (!r) {
- skb_rx = alloc_skb(skb->len, GFP_KERNEL);
- if (!skb_rx) {
- r = -ENOMEM;
- goto exit;
- }
- skb_put(skb_rx, skb->len);
- memcpy(skb_rx->data, buf, skb->len);
- ndlc_recv(phy->ndlc, skb_rx);
- }
- exit:
- return r;
- }
- /*
- * Reads an ndlc frame and returns it in a newly allocated sk_buff.
- * returns:
- * 0 : if received frame is complete
- * -EREMOTEIO : i2c read error (fatal)
- * -EBADMSG : frame was incorrect and discarded
- * -ENOMEM : cannot allocate skb, frame dropped
- */
- static int st_nci_spi_read(struct st_nci_spi_phy *phy,
- struct sk_buff **skb)
- {
- int r;
- u8 len;
- u8 buf[ST_NCI_SPI_MAX_SIZE];
- struct spi_device *dev = phy->spi_dev;
- struct spi_transfer spi_xfer = {
- .rx_buf = buf,
- .len = ST_NCI_SPI_MIN_SIZE,
- };
- r = spi_sync_transfer(dev, &spi_xfer, 1);
- if (r < 0)
- return -EREMOTEIO;
- len = be16_to_cpu(*(__be16 *) (buf + 2));
- if (len > ST_NCI_SPI_MAX_SIZE) {
- nfc_err(&dev->dev, "invalid frame len\n");
- phy->ndlc->hard_fault = 1;
- return -EBADMSG;
- }
- *skb = alloc_skb(ST_NCI_SPI_MIN_SIZE + len, GFP_KERNEL);
- if (*skb == NULL)
- return -ENOMEM;
- skb_reserve(*skb, ST_NCI_SPI_MIN_SIZE);
- skb_put(*skb, ST_NCI_SPI_MIN_SIZE);
- memcpy((*skb)->data, buf, ST_NCI_SPI_MIN_SIZE);
- if (!len)
- return 0;
- spi_xfer.len = len;
- r = spi_sync_transfer(dev, &spi_xfer, 1);
- if (r < 0) {
- kfree_skb(*skb);
- return -EREMOTEIO;
- }
- skb_put(*skb, len);
- memcpy((*skb)->data + ST_NCI_SPI_MIN_SIZE, buf, len);
- return 0;
- }
- /*
- * Reads an ndlc frame from the chip.
- *
- * On ST21NFCB, IRQ goes in idle state when read starts.
- */
- static irqreturn_t st_nci_irq_thread_fn(int irq, void *phy_id)
- {
- struct st_nci_spi_phy *phy = phy_id;
- struct spi_device *dev;
- struct sk_buff *skb = NULL;
- int r;
- if (!phy || !phy->ndlc || irq != phy->spi_dev->irq) {
- WARN_ON_ONCE(1);
- return IRQ_NONE;
- }
- dev = phy->spi_dev;
- dev_dbg(&dev->dev, "IRQ\n");
- if (phy->ndlc->hard_fault)
- return IRQ_HANDLED;
- if (!phy->ndlc->powered) {
- st_nci_spi_disable(phy);
- return IRQ_HANDLED;
- }
- r = st_nci_spi_read(phy, &skb);
- if (r == -EREMOTEIO || r == -ENOMEM || r == -EBADMSG)
- return IRQ_HANDLED;
- ndlc_recv(phy->ndlc, skb);
- return IRQ_HANDLED;
- }
- static struct nfc_phy_ops spi_phy_ops = {
- .write = st_nci_spi_write,
- .enable = st_nci_spi_enable,
- .disable = st_nci_spi_disable,
- };
- static int st_nci_spi_acpi_request_resources(struct spi_device *spi_dev)
- {
- struct st_nci_spi_phy *phy = spi_get_drvdata(spi_dev);
- struct gpio_desc *gpiod_reset;
- struct device *dev = &spi_dev->dev;
- u8 tmp;
- /* Get RESET GPIO from ACPI */
- gpiod_reset = devm_gpiod_get_index(dev, ST_NCI_GPIO_NAME_RESET, 1,
- GPIOD_OUT_HIGH);
- if (IS_ERR(gpiod_reset)) {
- nfc_err(dev, "Unable to get RESET GPIO\n");
- return -ENODEV;
- }
- phy->gpio_reset = desc_to_gpio(gpiod_reset);
- phy->irq_polarity = irq_get_trigger_type(spi_dev->irq);
- phy->se_status.is_ese_present = false;
- phy->se_status.is_uicc_present = false;
- if (device_property_present(dev, "ese-present")) {
- device_property_read_u8(dev, "ese-present", &tmp);
- tmp = phy->se_status.is_ese_present;
- }
- if (device_property_present(dev, "uicc-present")) {
- device_property_read_u8(dev, "uicc-present", &tmp);
- tmp = phy->se_status.is_uicc_present;
- }
- return 0;
- }
- static int st_nci_spi_of_request_resources(struct spi_device *dev)
- {
- struct st_nci_spi_phy *phy = spi_get_drvdata(dev);
- struct device_node *pp;
- int gpio;
- int r;
- pp = dev->dev.of_node;
- if (!pp)
- return -ENODEV;
- /* Get GPIO from device tree */
- gpio = of_get_named_gpio(pp, "reset-gpios", 0);
- if (gpio < 0) {
- nfc_err(&dev->dev,
- "Failed to retrieve reset-gpios from device tree\n");
- return gpio;
- }
- /* GPIO request and configuration */
- r = devm_gpio_request_one(&dev->dev, gpio,
- GPIOF_OUT_INIT_HIGH, ST_NCI_GPIO_NAME_RESET);
- if (r) {
- nfc_err(&dev->dev, "Failed to request reset pin\n");
- return r;
- }
- phy->gpio_reset = gpio;
- phy->irq_polarity = irq_get_trigger_type(dev->irq);
- phy->se_status.is_ese_present =
- of_property_read_bool(pp, "ese-present");
- phy->se_status.is_uicc_present =
- of_property_read_bool(pp, "uicc-present");
- return 0;
- }
- static int st_nci_spi_request_resources(struct spi_device *dev)
- {
- struct st_nci_nfc_platform_data *pdata;
- struct st_nci_spi_phy *phy = spi_get_drvdata(dev);
- int r;
- pdata = dev->dev.platform_data;
- if (pdata == NULL) {
- nfc_err(&dev->dev, "No platform data\n");
- return -EINVAL;
- }
- /* store for later use */
- phy->gpio_reset = pdata->gpio_reset;
- phy->irq_polarity = pdata->irq_polarity;
- r = devm_gpio_request_one(&dev->dev,
- phy->gpio_reset, GPIOF_OUT_INIT_HIGH,
- ST_NCI_GPIO_NAME_RESET);
- if (r) {
- pr_err("%s : reset gpio_request failed\n", __FILE__);
- return r;
- }
- phy->se_status.is_ese_present = pdata->is_ese_present;
- phy->se_status.is_uicc_present = pdata->is_uicc_present;
- return 0;
- }
- static int st_nci_spi_probe(struct spi_device *dev)
- {
- struct st_nci_spi_phy *phy;
- struct st_nci_nfc_platform_data *pdata;
- int r;
- dev_dbg(&dev->dev, "%s\n", __func__);
- dev_dbg(&dev->dev, "IRQ: %d\n", dev->irq);
- /* Check SPI platform functionnalities */
- if (!dev) {
- pr_debug("%s: dev is NULL. Device is not accessible.\n",
- __func__);
- return -ENODEV;
- }
- phy = devm_kzalloc(&dev->dev, sizeof(struct st_nci_spi_phy),
- GFP_KERNEL);
- if (!phy)
- return -ENOMEM;
- phy->spi_dev = dev;
- spi_set_drvdata(dev, phy);
- pdata = dev->dev.platform_data;
- if (!pdata && dev->dev.of_node) {
- r = st_nci_spi_of_request_resources(dev);
- if (r) {
- nfc_err(&dev->dev, "No platform data\n");
- return r;
- }
- } else if (pdata) {
- r = st_nci_spi_request_resources(dev);
- if (r) {
- nfc_err(&dev->dev,
- "Cannot get platform resources\n");
- return r;
- }
- } else if (ACPI_HANDLE(&dev->dev)) {
- r = st_nci_spi_acpi_request_resources(dev);
- if (r) {
- nfc_err(&dev->dev, "Cannot get ACPI data\n");
- return r;
- }
- } else {
- nfc_err(&dev->dev,
- "st_nci platform resources not available\n");
- return -ENODEV;
- }
- r = ndlc_probe(phy, &spi_phy_ops, &dev->dev,
- ST_NCI_FRAME_HEADROOM, ST_NCI_FRAME_TAILROOM,
- &phy->ndlc, &phy->se_status);
- if (r < 0) {
- nfc_err(&dev->dev, "Unable to register ndlc layer\n");
- return r;
- }
- phy->irq_active = true;
- r = devm_request_threaded_irq(&dev->dev, dev->irq, NULL,
- st_nci_irq_thread_fn,
- phy->irq_polarity | IRQF_ONESHOT,
- ST_NCI_SPI_DRIVER_NAME, phy);
- if (r < 0)
- nfc_err(&dev->dev, "Unable to register IRQ handler\n");
- return r;
- }
- static int st_nci_spi_remove(struct spi_device *dev)
- {
- struct st_nci_spi_phy *phy = spi_get_drvdata(dev);
- dev_dbg(&dev->dev, "%s\n", __func__);
- ndlc_remove(phy->ndlc);
- return 0;
- }
- static struct spi_device_id st_nci_spi_id_table[] = {
- {ST_NCI_SPI_DRIVER_NAME, 0},
- {}
- };
- MODULE_DEVICE_TABLE(spi, st_nci_spi_id_table);
- static const struct acpi_device_id st_nci_spi_acpi_match[] = {
- {"SMO2101", 0},
- {}
- };
- MODULE_DEVICE_TABLE(acpi, st_nci_spi_acpi_match);
- static const struct of_device_id of_st_nci_spi_match[] = {
- { .compatible = "st,st21nfcb-spi", },
- {}
- };
- MODULE_DEVICE_TABLE(of, of_st_nci_spi_match);
- static struct spi_driver st_nci_spi_driver = {
- .driver = {
- .name = ST_NCI_SPI_DRIVER_NAME,
- .of_match_table = of_match_ptr(of_st_nci_spi_match),
- .acpi_match_table = ACPI_PTR(st_nci_spi_acpi_match),
- },
- .probe = st_nci_spi_probe,
- .id_table = st_nci_spi_id_table,
- .remove = st_nci_spi_remove,
- };
- module_spi_driver(st_nci_spi_driver);
- MODULE_LICENSE("GPL");
- MODULE_DESCRIPTION(DRIVER_DESC);
|