123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125 |
- config SND_OMAP_SOC
- tristate "SoC Audio for the Texas Instruments OMAP chips"
- depends on (ARCH_OMAP && DMA_OMAP) || (ARM && COMPILE_TEST)
- select SND_DMAENGINE_PCM
- config SND_OMAP_SOC_DMIC
- tristate
- config SND_OMAP_SOC_MCBSP
- tristate
- config SND_OMAP_SOC_MCPDM
- tristate
- config SND_OMAP_SOC_HDMI_AUDIO
- tristate "HDMI audio support for OMAP4+ based SoCs"
- depends on SND_OMAP_SOC
- help
- For HDMI audio to work OMAPDSS HDMI support should be
- enabled.
- The hdmi audio driver implements cpu-dai component using the
- callbacks provided by OMAPDSS and registers the component
- under DSS HDMI device. Omap-pcm is registered for platform
- component also under DSS HDMI device. Dummy codec is used as
- as codec component. The hdmi audio driver implements also
- the card and registers it under its own platform device.
- The device for the driver is registered by OMAPDSS hdmi
- driver.
- config SND_OMAP_SOC_N810
- tristate "SoC Audio support for Nokia N810"
- depends on SND_OMAP_SOC && MACH_NOKIA_N810 && I2C
- depends on OMAP_MUX
- select SND_OMAP_SOC_MCBSP
- select SND_SOC_TLV320AIC3X
- help
- Say Y if you want to add support for SoC audio on Nokia N810.
- config SND_OMAP_SOC_RX51
- tristate "SoC Audio support for Nokia N900 (RX-51)"
- depends on SND_OMAP_SOC && ARM && I2C
- select SND_OMAP_SOC_MCBSP
- select SND_SOC_TLV320AIC3X
- select SND_SOC_TPA6130A2
- depends on GPIOLIB
- help
- Say Y if you want to add support for SoC audio on Nokia N900
- cellphone.
- config SND_OMAP_SOC_AMS_DELTA
- tristate "SoC Audio support for Amstrad E3 (Delta) videophone"
- depends on SND_OMAP_SOC && MACH_AMS_DELTA && TTY
- select SND_OMAP_SOC_MCBSP
- select SND_SOC_CX20442
- help
- Say Y if you want to add support for SoC audio device connected to
- a handset and a speakerphone found on Amstrad E3 (Delta) videophone.
- Note that in order to get those devices fully supported, you have to
- build the kernel with standard serial port driver included and
- configured for at least 4 ports. Then, from userspace, you must load
- a line discipline #19 on the modem (ttyS3) serial line. The simplest
- way to achieve this is to install util-linux-ng and use the included
- ldattach utility. This can be started automatically from udev,
- a simple rule like this one should do the trick (it does for me):
- ACTION=="add", KERNEL=="controlC0", \
- RUN+="/usr/sbin/ldattach 19 /dev/ttyS3"
- config SND_OMAP_SOC_OSK5912
- tristate "SoC Audio support for omap osk5912"
- depends on SND_OMAP_SOC && MACH_OMAP_OSK && I2C
- select SND_OMAP_SOC_MCBSP
- select SND_SOC_TLV320AIC23_I2C
- help
- Say Y if you want to add support for SoC audio on osk5912.
- config SND_OMAP_SOC_AM3517EVM
- tristate "SoC Audio support for OMAP3517 / AM3517 EVM"
- depends on SND_OMAP_SOC && MACH_OMAP3517EVM && I2C
- select SND_OMAP_SOC_MCBSP
- select SND_SOC_TLV320AIC23_I2C
- help
- Say Y if you want to add support for SoC audio on the OMAP3517 / AM3517
- EVM.
- config SND_OMAP_SOC_OMAP_TWL4030
- tristate "SoC Audio support for TI SoC based boards with twl4030 codec"
- depends on TWL4030_CORE && SND_OMAP_SOC
- select SND_OMAP_SOC_MCBSP
- select SND_SOC_TWL4030
- help
- Say Y if you want to add support for SoC audio on TI SoC based boards
- using twl4030 as c codec. This driver currently supports:
- - Beagleboard or Devkit8000
- - Gumstix Overo or CompuLab CM-T35/CM-T3730
- - IGEP v2
- - OMAP3EVM
- - SDP3430
- - Zoom2
- config SND_OMAP_SOC_OMAP_ABE_TWL6040
- tristate "SoC Audio support for OMAP boards using ABE and twl6040 codec"
- depends on TWL6040_CORE && SND_OMAP_SOC && COMMON_CLK
- depends on ARCH_OMAP4 || (SOC_OMAP5 && MFD_PALMAS) || COMPILE_TEST
- select SND_OMAP_SOC_DMIC
- select SND_OMAP_SOC_MCPDM
- select SND_SOC_TWL6040
- select SND_SOC_DMIC
- select COMMON_CLK_PALMAS if (SOC_OMAP5 && MFD_PALMAS)
- select CLK_TWL6040
- help
- Say Y if you want to add support for SoC audio on OMAP boards using
- ABE and twl6040 codec. This driver currently supports:
- - SDP4430/Blaze boards
- - PandaBoard (4430)
- - PandaBoardES (4460)
- - omap5-uevm (5432)
- config SND_OMAP_SOC_OMAP3_PANDORA
- tristate "SoC Audio support for OMAP3 Pandora"
- depends on TWL4030_CORE && SND_OMAP_SOC && MACH_OMAP3_PANDORA
- select SND_OMAP_SOC_MCBSP
- select SND_SOC_TWL4030
- help
- Say Y if you want to add support for SoC audio on the OMAP3 Pandora.
|